MasterFormat Division 35 – Waterway and Marine Construction in the Schematic Design Phase

Start with [CSI MasterFormat Division 35: Waterway and Marine Construction](/MasterFormat-division-35-waterway-and-marine-construction) for the broad scope and coordination boundaries. This page addresses the narrower schematic design phase intent.

Division 35 Activities During Schematic Design

Schematic design is where building systems take shape and early cost decisions are made. UniFormat provides the elemental framework for SD-phase cost models, comparative analysis, and scope documentation. CSI Dynamic Standards uses governed crosswalks to reveal the right MasterFormat sections as systems firm up—so scope decisions carry forward without manual remapping. For Division 35 specifically, the schematic design phase involves focused work on waterway and marine construction scope, products, and execution requirements. Use governed crosswalks from UniFormat elements to begin identifying MasterFormat specification sections. Refine the TOC as building systems are defined.

Key activities for Division 35 during schematic design include:

• Map UniFormat elements to MasterFormat sections as systems firm up — as it relates to waterway and marine construction sections and the products, methods, and quality standards they define
• Refine specification TOC based on evolving design scope — as it relates to waterway and marine construction sections and the products, methods, and quality standards they define
• Tag early BIM model elements with OmniClass classifications — as it relates to waterway and marine construction sections and the products, methods, and quality standards they define

Each of these activities requires current, accurate Division 35 section numbers. When teams reference outdated or incorrect section numbers during schematic design, the errors propagate into every subsequent phase.

Division 35 Sections Referenced in Schematic Design

The following Division 35 sections are commonly referenced during schematic design work:

• 35 20 00 – Waterway and Marine Construction and Equipment
• 35 30 00 – Coastal Construction
• 35 40 00 – Waterway Construction and Equipment
• 35 50 00 – Marine Construction and Equipment
• 35 70 00 – Dam Construction and Equipment

These sections define the scope boundaries, product requirements, and execution standards for waterway and marine construction work. During schematic design, these section references appear in updated specification toc and must be consistent with the project manual.

Schematic Design Deliverables That Reference Division 35

Project teams produce or consume these deliverables during the schematic design phase, many of which directly reference Division 35 sections:

• Updated specification TOC

Every deliverable that references Division 35 must use current section numbers and titles. A single incorrect section reference in a schematic design deliverable can trigger RFIs, scope disputes, or change orders during construction.

Common Issues with Division 35 During Schematic Design

• SD cost models that can't be compared to DD or CD estimates — When this occurs with Division 35 references during schematic design, the result is rework, coordination failures, or documentation that contradicts the project manual.
• Specification sections identified too late in the process — When this occurs with Division 35 references during schematic design, the result is rework, coordination failures, or documentation that contradicts the project manual.
• BIM model elements with no classification structure — When this occurs with Division 35 references during schematic design, the result is rework, coordination failures, or documentation that contradicts the project manual.

These issues are compounded when Division 35 sections must coordinate with other divisions. This division includes waterway and marine signaling, dredging, dams, levees, ports, harbors, navigation locks, coastal construction, and underwater construction. The more trades and disciplines that touch Division 35 scope during schematic design, the higher the cost of classification errors.

Cross-Standard Connections for Division 35 in Schematic Design

UniFormat: Division 35 extends UniFormat into marine and waterway infrastructure—specialized construction entities beyond typical building scope.

OmniClass: OmniClass Table 11 (Construction Entities) classifies marine and waterway facilities as built environment entities.

During the schematic design phase, these cross-references ensure that Division 35 specifications align with element-level classifications and lifecycle tags. Teams who rely on marine engineers designing port and harbor facilities and coastal engineers designing shoreline protection to maintain these connections manually risk inconsistencies that surface as coordination issues downstream.

How CSI Dynamic Standards Helps with Division 35 in Schematic Design

CSI Dynamic Standards includes Division 35 as part of a connected, edition-aware classification system—licensed through The Construction Standard. Built for real project work from concept to closeout and beyond, it provides always-current Division 35 section numbers and titles, governed cross-references to UniFormat and OmniClass, and edition tracking that prevents schematic design deliverables from referencing obsolete classification data. For teams working through the schematic design phase, this means Division 35 references in every deliverable stay accurate and consistent with the rest of the project manual.