MasterFormat Division 35 – Waterway and Marine Construction in the Construction Documents Phase

Start with [CSI MasterFormat Division 35: Waterway and Marine Construction](/MasterFormat-division-35-waterway-and-marine-construction) for the broad scope and coordination boundaries. This page addresses the narrower construction documents phase intent.

Division 35 Activities During Construction Documents

The construction documents phase is where specification errors become most expensive. A missing section, an incorrect cross-reference, or an obsolete section number discovered during bidding or construction costs orders of magnitude more to resolve than catching it before issuance. CSI Dynamic Standards supports pre-issue checks via integrations through enterprise solutions to catch these errors systematically. For Division 35 specifically, the construction documents phase involves focused work on waterway and marine construction scope, products, and execution requirements. Issue complete specification sections with authorized, current numbers and titles. Use SectionFormat and PageFormat discipline to maintain consistent structure across all sections.

Key activities for Division 35 during construction documents include:

• Run pre-issue checks to catch TOC items with no authored section — as it relates to waterway and marine construction sections and the products, methods, and quality standards they define
• Flag keynotes that don't match specification sections — as it relates to waterway and marine construction sections and the products, methods, and quality standards they define
• Detect technical sections that imply missing Division 01 articles — as it relates to waterway and marine construction sections and the products, methods, and quality standards they define
• Identify obsolete or deprecated section numbers — as it relates to waterway and marine construction sections and the products, methods, and quality standards they define
• Validate cross-references between specification sections — as it relates to waterway and marine construction sections and the products, methods, and quality standards they define

Each of these activities requires current, accurate Division 35 section numbers. When teams reference outdated or incorrect section numbers during construction documents, the errors propagate into every subsequent phase.

Division 35 Sections Referenced in Construction Documents

The following Division 35 sections are commonly referenced during construction documents work:

• 35 20 00 – Waterway and Marine Construction and Equipment
• 35 30 00 – Coastal Construction
• 35 40 00 – Waterway Construction and Equipment
• 35 50 00 – Marine Construction and Equipment
• 35 70 00 – Dam Construction and Equipment

These sections define the scope boundaries, product requirements, and execution standards for waterway and marine construction work. During construction documents, these section references appear in complete project manual with authorized MasterFormat numbering and pre-issue check reports and must be consistent with the project manual.

Construction Documents Deliverables That Reference Division 35

Project teams produce or consume these deliverables during the construction documents phase, many of which directly reference Division 35 sections:

• Complete project manual with authorized MasterFormat numbering
• Pre-issue check reports

Every deliverable that references Division 35 must use current section numbers and titles. A single incorrect section reference in a construction documents deliverable can trigger RFIs, scope disputes, or change orders during construction.

Common Issues with Division 35 During Construction Documents

• TOC lists sections that were never authored — When this occurs with Division 35 references during construction documents, the result is rework, coordination failures, or documentation that contradicts the project manual.
• Keynotes reference sections not in the project manual — When this occurs with Division 35 references during construction documents, the result is rework, coordination failures, or documentation that contradicts the project manual.
• Division 01 gaps from technical section requirements — When this occurs with Division 35 references during construction documents, the result is rework, coordination failures, or documentation that contradicts the project manual.
• Obsolete section numbers from older MasterFormat editions — When this occurs with Division 35 references during construction documents, the result is rework, coordination failures, or documentation that contradicts the project manual.

These issues are compounded when Division 35 sections must coordinate with other divisions. This division includes waterway and marine signaling, dredging, dams, levees, ports, harbors, navigation locks, coastal construction, and underwater construction. The more trades and disciplines that touch Division 35 scope during construction documents, the higher the cost of classification errors.

Cross-Standard Connections for Division 35 in Construction Documents

UniFormat: Division 35 extends UniFormat into marine and waterway infrastructure—specialized construction entities beyond typical building scope.

OmniClass: OmniClass Table 11 (Construction Entities) classifies marine and waterway facilities as built environment entities.

During the construction documents phase, these cross-references ensure that Division 35 specifications align with element-level classifications and lifecycle tags. Teams who rely on marine engineers designing port and harbor facilities and coastal engineers designing shoreline protection to maintain these connections manually risk inconsistencies that surface as coordination issues downstream.

How CSI Dynamic Standards Helps with Division 35 in Construction Documents

CSI Dynamic Standards includes Division 35 as part of a connected, edition-aware classification system—licensed through The Construction Standard. Built for real project work from concept to closeout and beyond, it provides always-current Division 35 section numbers and titles, governed cross-references to UniFormat and OmniClass, and edition tracking that prevents construction documents deliverables from referencing obsolete classification data. For teams working through the construction documents phase, this means Division 35 references in every deliverable stay accurate and consistent with the rest of the project manual.