MasterFormat Division 25 – Integrated Automation in OmniClass BIM Classification Guide

Start with the role-neutral [CSI MasterFormat Division 25: Integrated Automation](/MasterFormat-division-25-integrated-automation) guide for the broad scope and coordination boundaries. The guidance below addresses the narrower OmniClass bim classification guide intent.

Division 25 in the OmniClass BIM Classification Guide Workflow

OmniClass provides the lifecycle classification that BIM models need to be useful beyond design—through construction, handover, and decades of facility operations. Tagging model elements with authoritative OmniClass classifications ensures data is findable, comparable, and ingestible by downstream systems. CSI Dynamic Standards includes current OmniClass tables for consistent, authoritative BIM classification—licensed through The Construction Standard. Within this workflow, Division 25 provides the section-level classification that keeps integrated automation scope organized and traceable. Cross-referenced with OmniClass to maintain alignment between model classification and specification organization.

The OmniClass bim classification guide workflow involves the following steps—each of which touches Division 25 data:

1. Step 1 — Tag BIM model elements with OmniClass table entries appropriate to their type (products, elements, spaces, etc.) For Division 25, this means integrated automation sections must be correctly numbered, titled, and cross-referenced at this stage.
2. Step 2 — Cross-reference OmniClass tags to MasterFormat specification sections for document alignment For Division 25, this means integrated automation sections must be correctly numbered, titled, and cross-referenced at this stage.
3. Step 3 — Maintain classification consistency across disciplines and project phases For Division 25, this means integrated automation sections must be correctly numbered, titled, and cross-referenced at this stage.
4. Step 4 — Export classified BIM data in formats FM systems and digital twins can ingest (COBie, etc.) For Division 25, this means integrated automation sections must be correctly numbered, titled, and cross-referenced at this stage.

Key Division 25 Sections in OmniClass BIM Classification Guide

The following Division 25 sections are most frequently referenced during OmniClass bim classification guide:

• 25 05 00 – Common Work Results for Integrated Automation
• 25 10 00 – Integrated Automation Network Equipment
• 25 30 00 – Integrated Automation Instrumentation and Terminal Devices
• 25 50 00 – Integrated Automation Facility Controls

These sections must be current and consistently referenced throughout the OmniClass bim classification guide process. A single outdated section number in a OmniClass bim classification guide deliverable can trigger RFIs, scope disputes, and rework downstream.

Who Does Division 25 Work in This Workflow

• BIM managers and model coordinators — engages with Division 25 – Integrated Automation sections during OmniClass bim classification guide to ensure integrated automation scope is correctly classified and coordinated.
• Architecture and engineering firms producing BIM deliverables — engages with Division 25 – Integrated Automation sections during OmniClass bim classification guide to ensure integrated automation scope is correctly classified and coordinated.
• Owners requiring classified BIM handover — engages with Division 25 – Integrated Automation sections during OmniClass bim classification guide to ensure integrated automation scope is correctly classified and coordinated.
• Software platforms building BIM classification features — engages with Division 25 – Integrated Automation sections during OmniClass bim classification guide to ensure integrated automation scope is correctly classified and coordinated.

These professionals depend on accurate Division 25 data to produce deliverables that align with the project manual and avoid classification conflicts across disciplines.

How Standards Support Division 25 in OmniClass BIM Classification Guide

Construction standards govern how Division 25 sections are organized, cross-referenced, and maintained within the OmniClass bim classification guide workflow:

OmniClass — Comprehensive lifecycle classification covering all aspects of the built environment—from building elements and spaces to work results and phases.

MasterFormat — Cross-referenced with OmniClass to maintain alignment between model classification and specification organization.

UniFormat — Provides element-level classification that connects BIM model organization to early-phase design structure.

Division 25 Cross-References

UniFormat: Division 25 spans multiple UniFormat D (Services) elements—integrating controls for HVAC, lighting, fire protection, and security into a unified system.

OmniClass: OmniClass Table 23 (Products) classifies control devices, sensors, and network equipment; Table 14 (Phases) covers commissioning of integrated systems.

These governed relationships ensure that Division 25 data stays aligned with element classifications and lifecycle tags throughout the OmniClass bim classification guide workflow. When cross-references break, coordination failures multiply across every trade and discipline that touches integrated automation work.

CSI Dynamic Standards for Division 25 in OmniClass BIM Classification Guide

CSI Dynamic Standards includes Division 25 as part of a connected, edition-aware classification system—licensed through The Construction Standard. For teams executing OmniClass bim classification guide, this means always-current Division 25 section numbers and titles, governed cross-references to UniFormat and OmniClass, and edition tracking that prevents the classification errors that cascade through OmniClass bim classification guide deliverables. Instead of manually verifying that Division 25 references are up to date at each workflow step, teams get a single source of truth that stays current across every project.