MasterFormat Division 14 – Conveying Equipment in the Closeout & Commissioning Phase

Start with [CSI MasterFormat Division 14: Conveying Equipment](/MasterFormat-division-14-conveying-equipment) for the broad scope and coordination boundaries. This page addresses the narrower closeout & commissioning phase intent.

Division 14 Activities During Closeout & Commissioning

Closeout and commissioning is where the full value of consistent classification is realized—or where the cost of inconsistency comes due. O&M manuals, functional performance tests, TAB reports, training documentation, and warranties must be aligned to the specification sections they reference. Asset registers must be tagged with classifications that FM systems can ingest. CSI Dynamic Standards—licensed through The Construction Standard—keeps this handover data structured for the next 30+ years of building operations. For Division 14 specifically, the closeout & commissioning phase involves focused work on conveying equipment scope, products, and execution requirements. Align O&M manuals, FPTs, TAB reports, training, and warranties to the specification sections they reference—ensuring owners can cross-reference operations documentation to original project requirements.

Key activities for Division 14 during closeout & commissioning include:

• Deliver O&M manuals aligned to referenced specification sections — as it relates to conveying equipment sections and the products, methods, and quality standards they define
• Align commissioning documentation to specification requirements — as it relates to conveying equipment sections and the products, methods, and quality standards they define
• Validate handover completeness against specification TOC — as it relates to conveying equipment sections and the products, methods, and quality standards they define

Each of these activities requires current, accurate Division 14 section numbers. When teams reference outdated or incorrect section numbers during closeout & commissioning, the errors propagate into every subsequent phase.

Division 14 Sections Referenced in Closeout & Commissioning

The following Division 14 sections are commonly referenced during closeout & commissioning work:

• 14 10 00 – Dumbwaiters
• 14 20 00 – Elevators
• 14 30 00 – Escalators and Moving Walks
• 14 40 00 – Lifts
• 14 70 00 – Turntables

These sections define the scope boundaries, product requirements, and execution standards for conveying equipment work. During closeout & commissioning, these section references appear in section-aligned o&m manuals and commissioning documentation indexed to specifications and must be consistent with the project manual.

Closeout & Commissioning Deliverables That Reference Division 14

Project teams produce or consume these deliverables during the closeout & commissioning phase, many of which directly reference Division 14 sections:

• Section-aligned O&M manuals
• Commissioning documentation indexed to specifications

Every deliverable that references Division 14 must use current section numbers and titles. A single incorrect section reference in a closeout & commissioning deliverable can trigger RFIs, scope disputes, or change orders during construction.

Common Issues with Division 14 During Closeout & Commissioning

• O&M manuals that don't reference correct specification sections — When this occurs with Division 14 references during closeout & commissioning, the result is rework, coordination failures, or documentation that contradicts the project manual.
• Asset data that FM systems can't ingest — When this occurs with Division 14 references during closeout & commissioning, the result is rework, coordination failures, or documentation that contradicts the project manual.
• Missing handover items for sections in the project manual — When this occurs with Division 14 references during closeout & commissioning, the result is rework, coordination failures, or documentation that contradicts the project manual.
• Classification inconsistencies between construction and operations data — When this occurs with Division 14 references during closeout & commissioning, the result is rework, coordination failures, or documentation that contradicts the project manual.

These issues are compounded when Division 14 sections must coordinate with other divisions. This division includes elevators, escalators and moving walks, lifts, dumbwaiters, turntables, scaffolding, and transportation systems. The more trades and disciplines that touch Division 14 scope during closeout & commissioning, the higher the cost of classification errors.

Cross-Standard Connections for Division 14 in Closeout & Commissioning

UniFormat: Division 14 maps to UniFormat D (Services)—the vertical and horizontal transportation services that move people and materials through the building.

OmniClass: OmniClass Table 23 (Products) classifies conveying equipment products; Table 22 (Work Results) covers installation.

During the closeout & commissioning phase, these cross-references ensure that Division 14 specifications align with element-level classifications and lifecycle tags. Teams who rely on vertical transportation consultants and elevator and escalator manufacturers to maintain these connections manually risk inconsistencies that surface as coordination issues downstream.

How CSI Dynamic Standards Helps with Division 14 in Closeout & Commissioning

CSI Dynamic Standards includes Division 14 as part of a connected, edition-aware classification system—licensed through The Construction Standard. Built for real project work from concept to closeout and beyond, it provides always-current Division 14 section numbers and titles, governed cross-references to UniFormat and OmniClass, and edition tracking that prevents closeout & commissioning deliverables from referencing obsolete classification data. For teams working through the closeout & commissioning phase, this means Division 14 references in every deliverable stay accurate and consistent with the rest of the project manual.