MasterFormat Division 06 – Wood, Plastics, and Composites in the Construction Documents Phase

Start with [CSI MasterFormat Division 06: Wood, Plastics, and Composites](/MasterFormat-division-06-wood-plastics-and-composites) for the broad scope and coordination boundaries. This page addresses the narrower construction documents phase intent.

Division 06 Activities During Construction Documents

The construction documents phase is where specification errors become most expensive. A missing section, an incorrect cross-reference, or an obsolete section number discovered during bidding or construction costs orders of magnitude more to resolve than catching it before issuance. CSI Dynamic Standards supports pre-issue checks via integrations through enterprise solutions to catch these errors systematically. For Division 06 specifically, the construction documents phase involves focused work on wood, plastics, and composites scope, products, and execution requirements. Issue complete specification sections with authorized, current numbers and titles. Use SectionFormat and PageFormat discipline to maintain consistent structure across all sections.

Key activities for Division 06 during construction documents include:

• Run pre-issue checks to catch TOC items with no authored section — as it relates to wood, plastics, and composites sections and the products, methods, and quality standards they define
• Flag keynotes that don't match specification sections — as it relates to wood, plastics, and composites sections and the products, methods, and quality standards they define
• Detect technical sections that imply missing Division 01 articles — as it relates to wood, plastics, and composites sections and the products, methods, and quality standards they define
• Identify obsolete or deprecated section numbers — as it relates to wood, plastics, and composites sections and the products, methods, and quality standards they define
• Validate cross-references between specification sections — as it relates to wood, plastics, and composites sections and the products, methods, and quality standards they define

Each of these activities requires current, accurate Division 06 section numbers. When teams reference outdated or incorrect section numbers during construction documents, the errors propagate into every subsequent phase.

Division 06 Sections Referenced in Construction Documents

The following Division 06 sections are commonly referenced during construction documents work:

• 06 10 00 – Rough Carpentry
• 06 20 00 – Finish Carpentry
• 06 40 00 – Architectural Woodwork
• 06 50 00 – Structural Plastics
• 06 60 00 – Plastic Fabrications

These sections define the scope boundaries, product requirements, and execution standards for wood, plastics, and composites work. During construction documents, these section references appear in complete project manual with authorized MasterFormat numbering and pre-issue check reports and must be consistent with the project manual.

Construction Documents Deliverables That Reference Division 06

Project teams produce or consume these deliverables during the construction documents phase, many of which directly reference Division 06 sections:

• Complete project manual with authorized MasterFormat numbering
• Pre-issue check reports

Every deliverable that references Division 06 must use current section numbers and titles. A single incorrect section reference in a construction documents deliverable can trigger RFIs, scope disputes, or change orders during construction.

Common Issues with Division 06 During Construction Documents

• TOC lists sections that were never authored — When this occurs with Division 06 references during construction documents, the result is rework, coordination failures, or documentation that contradicts the project manual.
• Keynotes reference sections not in the project manual — When this occurs with Division 06 references during construction documents, the result is rework, coordination failures, or documentation that contradicts the project manual.
• Division 01 gaps from technical section requirements — When this occurs with Division 06 references during construction documents, the result is rework, coordination failures, or documentation that contradicts the project manual.
• Obsolete section numbers from older MasterFormat editions — When this occurs with Division 06 references during construction documents, the result is rework, coordination failures, or documentation that contradicts the project manual.

These issues are compounded when Division 06 sections must coordinate with other divisions. This division includes rough carpentry, finish carpentry, architectural woodwork, structural composites, plastic fabrications, and wood treatment. The more trades and disciplines that touch Division 06 scope during construction documents, the higher the cost of classification errors.

Cross-Standard Connections for Division 06 in Construction Documents

UniFormat: Division 06 maps to UniFormat B (Shell) for wood framing, C (Interiors) for casework and millwork, and B10 for mass timber superstructure.

OmniClass: OmniClass Table 23 (Products) classifies lumber, engineered wood, and composite products used across Division 06 sections.

During the construction documents phase, these cross-references ensure that Division 06 specifications align with element-level classifications and lifecycle tags. Teams who rely on architects specifying millwork and casework and carpenters and millwork fabricators to maintain these connections manually risk inconsistencies that surface as coordination issues downstream.

How CSI Dynamic Standards Helps with Division 06 in Construction Documents

CSI Dynamic Standards includes Division 06 as part of a connected, edition-aware classification system—licensed through The Construction Standard. Built for real project work from concept to closeout and beyond, it provides always-current Division 06 section numbers and titles, governed cross-references to UniFormat and OmniClass, and edition tracking that prevents construction documents deliverables from referencing obsolete classification data. For teams working through the construction documents phase, this means Division 06 references in every deliverable stay accurate and consistent with the rest of the project manual.